LiFePO4 ES48V60Ah 15S1P Communications Energy Storage Systems for Forklift
Quick Detail for LiFePO4 ES48V60Ah 15S1P Communications Energy Storage Systems for Forklift
| NO. | Item | Specification | Remark |
| Place of Origin: | Guangdong China | Brand Name: | TAC |
| Model Name: | ES48V60Ah | Capacity: | 60AH |
| Working current: | 48V | Size: | L207W136T28.5mm |
| Features: 1. Portable energy storage 48V60AH Lithium battery. 2. 15S1P 48v LiFePO4 battery 3.2V60ahCommunications energy storage systems for Lithium battery for forklift . 3. AGV lithium battery ES48V60Ah. 4.Light weight and higher energy density than any rechargeable battery. 5.Installed IC chip will prevent the battery pack from over charge and over discharge,this helps protect battery chemistry integrity and prolongs battery life. |
Cell Specification for LiFePO4 ES48V60Ah 15S1P Communications Energy Storage Systems for Forklift
| Cell | No. | Item | General Parameter | Remark |
| 1 | Rated Capacity | Typical | 50Ah | Standard discharge(0.2C5A) after Standard charge |
| Minimum | 50Ah |
| 2 | Nominal Voltage | 3.2V | Mean Operation Voltage |
| 3 | Internal Impedance | ≤1.8mΩ | Internal resistance measured at AC 1KHZ after 50% charge The measure must uses the new batteries that within one week after shipment and cycles less than 5 times |
| 4 | Dimension | Thickness/:27.5±0.5mm | Initial Dimension 27135180F |
| Width/:136±0.5mm |
| Hight/:181±0.5mm |
| 5 | Weight | 1.3±0.03kg | Approx |
| 6 | Standard charge | Constant Current 0.2C5A Constant Voltage3.65V 0.01C5A cut-off | Charge time : Approx4H |
| 7 | Rapid Charge | Constant Current 1C5A Constant Voltage3.65V 0.01C5A cut-off | Charge time : Approx1.5 H |
| 8 | Standard discharge | Constant current 0.2C5A end voltage2.5 V | |
| 9 | Maximum discharge current | Constant current 1C5A end voltage2.5 V | |
Pack Specification for LiFePO4 ES48V60Ah 15S1P
| No. | Item | Specification |
| 1 | Combination method | 15S1P |
| 2 | Rated Capacity | 60AH |
| 3 | Nominal Voltage | 48V |
| 4 | Voltage at end of Discharge | 45V |
| 5 | Charging Voltage | 54.6V |
| 7 | Maximum Continuous Charge Current | 60A |
| 8 | Maximum Continuous Discharge Current | 60A |
| 9 | Maximum output power | 2880W |
| 9 | Dimensions | L440*W440*T88(mm) |
| 10 | Weight | Approx 25KG |
LiFePO4 ES48V60Ah 15S1P Communications Energy Storage Systems for Forklift Constructional Detail:
Packing Mathod
The ESS battery pack protected by speially foam shelf to aovid vaggle, and then put it into extra thick paper carton
Applicaiton
The ESS can be used in various solar device
off grid and on grid back up
home back up
Safety LiFePo4 Storage Battery Systems For Emergency Power Supply , UPS.
Quality guarantee
Four years
End-of-life conditions: the discharge capacity can not reach 70% DOD after 3 consecutive charges and discharges.
The battery pack can be disassemble after written approval from the suppliers; the supplier doesn’t take any responsibility for the adverse consequences caused by the disassembly of the battery pack without its written approval.
Cycle life
≥2000 times
Discharge the battery pack at 0.5C electric current after standard charge and terminate the cycle life test when discharge capacity accounts for less than 70% of the initial capacity.
More Model
Product Tags:
|
|
LiFePO4 ESS 48V60Ah Communications Energy Storage Systems For Forklift Images
|
